Detail Alat

Kirby Morgan Helmet

• CE certified
• Weight: Kirby Morgan 18 BandMask® - 13.63 pounds
• Mask Frame: Kirby Morgan 18 BandMask®: Fiberglass, polyester resin, polyester gel coat, and carbon fibers
• Control Knobs: Polyurathane
• Lens: Clear polycarbonate
• Hood: Neoprene.
• O-Rings: Buna-N
• Recommended Lubricants: Christo-Lube® Dow Corning® MS4 Silicone Lubricant. Krytox® and Halocarbon® are also acceptable.
• Regulator Performance: Kirby Morgan SuperFlow® 350 Performance. The Kirby Morgan SuperFlow® 350 regulator on the Kirby Morgan 18 and 28 BandMasks® offers high performance. The commercial diving regulator has been tested at Dive Lab at Panama City, Florida. It meets all current U.S. Navy and European commercial diving standards.
• Cage Code: The cage code for identifying Kirby Morgan DSI products for U.S. government purposes is 58366.
• CR Standards: These masks meet or exceed all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.
• CE Approved: Both the Kirby Morgan 18® and 28® BandMasks® are CE Approved.
• Temperature Limitations: Use at water temperatures below 33 degrees Fahrenheit (1 degrees Celsius) requires use of the Kirby Morgan Hot Water Shroud (P/N 525-100) and hot water.
• Operational Specifications & Limitations: Commercial Diving Umbilical minimum I.D. 3/8 in. (9.5 mm) of not more than two sections, total length not to exceed 600 feet (183m).  This bandmask meets or exceeds all requirements of NPD, Health and Safety, (U.K.), United States Navy, ADCI United States and is CR rated by Dive Lab, Panama City, Fla., USA.  Recommended overbottom (OB) gas supply pressure for best performance at depths are calculated by the formula (fsw x 0.445+14.7) + recommended p.s.i.g